China Hot selling 08b× 20z Small Hole Forged High-Strength Hard Tooth Surface Sprockets for Windrower

Product Description

 

Main parameter Diameter High Weight /Kg Inner hole specification Material
85 19 0.3 Ø17-6 45#
Chain number 08B Number of teeth 20 Hardness HRC40-45

 

Unit: mm

Single bond
Simple process and high universality

 

Special tool processing
Forming tool processing, standard tooth shape, high precision

 

Forging blank
High density, high strength, material saving

 

1 Q: Notice before purchase
A: The parameters in the product details are reference values, which may be different from the actual size. Before making an order, be sure to confirm the size you need with our customer service. All rubber parts, CZPT and other vulnerable parts are not covered by the San Bao warranty.
2 Q: Questions about return and replacement
A: As the goods are customized products, all products must be sampled before batch ordering to determine the size data and performance data. We will not accept any request for return or replacement of products that are directly customized in batches without passing the sample verification of relevant performance. Please fully communicate with us before ordering the samples. Once the samples are sold, they will not be returned or replaced.
3 Q: Payment method
A: 50% of the total payment for goods shall be paid at the time of ordering, and the contract shall be deemed to be effective after the payment is received; The balance payment shall be paid after the goods are produced and packaged, and the goods shall be delivered after the balance payment is received.
4 Q: Who bears the transportation and packaging costs?
A: According to the principle of proximity, we will pay the transportation and packaging costs from the company to the site (international express) or port, and the later costs after the goods arrive at the site or port will be borne by the buyer.
5 Q: How long is the delivery time?
A: Due to product characteristics, except for a few products with a small amount of inventory, the production of other products starts after the order contract takes effect. Therefore, the supply cycle should be determined according to the order.
6 Q: How to ensure the safety of cargo transportation?
A: Before the product leaves the factory, the most suitable packaging method among carton, wooden case, tray, iron basket, iron box and container will be selected according to the characteristics of the product. At the same time, adhesive tape, packing belt, steel belt, adhesive tray film, foam board, bubble film and other packing materials will be used to seal, fix and cushion the filling materials, so as to ensure the safety of the goods during transportation as far as possible.

 

Standard Or Nonstandard: Nonstandard
Application: Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Structural Stee-45#
Samples:
US$ 3.2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

small sprocket

How do I calculate the gear ratio when using a small sprocket in a system?

Calculating the gear ratio when using a small sprocket in a system is essential for understanding the relationship between the driver and driven sprockets’ rotational speeds. The gear ratio is a measure of the speed or torque multiplication achieved by the sprocket system. To calculate the gear ratio, you need to know the number of teeth on both the small sprocket (driver) and the large sprocket (driven).

The gear ratio (GR) is determined using the formula:

GR = (Number of Teeth on Driven Sprocket) / (Number of Teeth on Driver Sprocket)

For example, suppose the small sprocket (driver) has 10 teeth, and the large sprocket (driven) has 30 teeth. The gear ratio would be:

GR = 30 / 10 = 3

In this case, the gear ratio is 3, which means the driven sprocket rotates three times for every one rotation of the driver sprocket.

The gear ratio is essential for understanding how the sprocket system will affect speed and torque. A higher gear ratio (e.g., 4 or 5) indicates that the driven sprocket will rotate more times than the driver sprocket, resulting in higher speed but lower torque at the driven sprocket. Conversely, a lower gear ratio (e.g., 2 or 3) indicates higher torque but lower speed at the driven sprocket.

Keep in mind that the gear ratio only considers the number of teeth on the sprockets and does not account for frictional losses or other factors in the system. However, it serves as a fundamental parameter in sprocket system design and analysis.

small sprocket

How do I properly install and align small sprockets for optimal performance?

Proper installation and alignment of small sprockets are crucial for ensuring optimal performance and longevity of the sprocket system. Here are the steps to follow when installing and aligning small sprockets:

  1. Clean the Components: Before installation, ensure that the sprockets, shafts, and surrounding areas are clean and free from dirt, debris, and old lubricants. Cleaning the components will help in achieving a more accurate alignment.
  2. Check for Damage: Inspect the sprockets for any signs of damage, wear, or deformation. Do not install a sprocket that is damaged, as it can lead to premature failure.
  3. Identify Keyway or Set Screw: Determine the type of mounting method required for your small sprocket. Some sprockets may have a keyway for a key that fits into a keyslot on the shaft, while others use set screws to secure the sprocket to the shaft.
  4. Mount the Sprocket: Carefully slide the sprocket onto the shaft, ensuring that it fits snugly. If the sprocket uses a keyway, insert the key into the keyslot and then slide the sprocket on. For set screws, position the sprocket at the desired location on the shaft.
  5. Align Multiple Sprockets: In systems with multiple sprockets and a chain, it is essential to align all the sprockets along the same plane. Use a straightedge or laser alignment tool to check the alignment and adjust as necessary.
  6. Tighten Set Screws: If your sprocket uses set screws, tighten them evenly to secure the sprocket in place. Be cautious not to over-tighten the set screws, as it can damage the sprocket or the shaft.
  7. Use a Torque Wrench: If specified by the manufacturer, use a torque wrench to apply the correct amount of torque to the set screws or other mounting fasteners. This helps prevent over-tightening and ensures proper attachment.
  8. Check for Runout: After installation, check the sprocket for runout, which is the amount of wobble or eccentricity. Excessive runout can cause chain misalignment and premature wear. If there is significant runout, reposition the sprocket and re-check.
  9. Lubrication: Apply the appropriate lubricant to the sprocket and chain (if applicable) as per the manufacturer’s recommendations. Proper lubrication reduces friction, wear, and noise.
  10. Perform a Function Test: Rotate the sprocket manually to ensure it moves freely and smoothly. Verify that the chain engagement is proper and that there is no binding or tight spots in the rotation.
  11. Regular Maintenance: Periodically inspect the sprocket system for wear, misalignment, or damage. Address any issues promptly to avoid further problems.

Proper installation and alignment of small sprockets are essential for optimal performance, reduced wear, and increased reliability in mechanical systems.

small sprocket

How do I know if my bike sprockets are compatible with my chain and derailleurs?

Ensuring compatibility between bike sprockets, chains, and derailleurs is essential for smooth and efficient gear shifting. Here are the steps to determine if your bike sprockets are compatible:

1. Sprocket Type: Identify the type of sprocket setup on your bike. Most modern bicycles use cassette-style sprockets on the rear wheel and one to three chainrings at the front crankset. Make sure you know the number of sprockets on your cassette and the number of chainrings on your crankset.

2. Chain Speed: Check the speed of your bike’s chain. This refers to the number of rear sprockets and the corresponding chain width. Common chain speeds for modern bikes are 8-speed, 9-speed, 10-speed, 11-speed, or 12-speed. The chain speed must match the number of sprockets on the rear cassette.

3. Chain Width: Ensure that the chain width corresponds to the chain speed. For example, an 8-speed chain is wider than a 10-speed chain. Using the correct chain width is crucial for proper engagement with the sprockets and chainrings.

4. Derailleur Compatibility: Check if your derailleurs are compatible with the number of sprockets on the cassette and the chainrings. Different chain speeds require derailleurs with specific capacity and range to accommodate the various gear ratios.

5. Teeth Count: Consider the number of teeth on your chainrings and cassette sprockets. The chainrings’ teeth count affects the bike’s gear range and overall gearing ratios. Make sure the combination of chainrings and cassette sprockets provides the desired gear ratios for your riding style and terrain.

6. Brand and Model: When replacing sprockets, chains, or derailleurs, try to use components from the same brand and model series. Mixing different brands or models may lead to compatibility issues, affecting shifting performance.

7. Seek Professional Advice: If you are unsure about compatibility or need to make significant changes to your bike’s sprocket setup, it’s advisable to seek the advice of a professional bike mechanic or a knowledgeable cycling specialist. They can help you choose the appropriate components and ensure compatibility between the sprockets, chain, and derailleurs.

Proper compatibility between sprockets, chains, and derailleurs is crucial for optimal performance, smooth gear shifting, and overall riding experience. Taking the time to ensure compatibility and using quality components will contribute to a more enjoyable and efficient cycling experience.

China Hot selling 08b× 20z Small Hole Forged High-Strength Hard Tooth Surface Sprockets for Windrower  China Hot selling 08b× 20z Small Hole Forged High-Strength Hard Tooth Surface Sprockets for Windrower
editor by CX 2023-11-01

Tags

Recent Posts